|
Product Details:
|
| Size: | 19inch | Resolution: | 1280×1024 |
|---|---|---|---|
| Touch Points: | 10points | Touch Screen: | Capacitive Touch Screen |
| Surface Hardness: | More Than 7H | Input Method: | Finger Or Capacitive Pen |
| Working Voltage: | USB(5V) | Bonding Way: | Optical Bonding (OCA) |
| Transmittance: | ≥85% | Brightness: | 350cd/㎡ |
| High Light: | sunlight readable lcd monitor,optical touch panel |
||
19 Inch Optical Bonding Module of Capacitive Touch Screen with TFT LCM with LVDS
| Items | Parameters |
|
LCD Screen Size |
19 inch |
|
Aspect ratio |
4:3 |
|
Resolution |
1280×1024 |
|
Visible Area |
(H)376.32mm×(V)301.056mm |
|
Viewing Angle |
85/85/80/80 (Typ.)(CR≥10) |
|
Contrast Ratio |
1000:1 |
|
Response Time |
3.6/1.4 (Typ.)(Tr/Td) ms |
|
Colors D |
8Bit 16.7M , 72% NTSC |
|
Scanning Frequency |
60Hz |
|
Interface |
LVDS(See 1.2 for details) |
|
Operation Voltage |
5V |
|
Back light Source |
WLED |
|
Center Luminance of White |
350cd/㎡ |
|
Operating Lift of backlight |
Min. 30K hours |
|
Operation Voltage |
41V~43.2V (for reference) |
|
Operation Current |
Typ current:60ma |
|
BLU Power consumption |
Max. 9.8W(for reference) |
|
Touch Screen Type |
10 point G+G capacitive touch panel |
|
Touch Mode |
Finger or capacitor pen |
|
Response Speed |
10ms |
|
Reported Rate |
100Hz |
|
Resolution |
≥4096×4096 |
|
Touch Times |
Durable single-point≥30 million times |
|
Interface |
USB |
|
Working Voltage |
Typical value+5VDC |
|
Glass Thickness |
Total 2.45mm±0.2(Cover1.1mm+SCA0.25mm+Senser1.1mm) |
|
Surface Treatment |
NO |
|
Surface Durability |
Surface hardness equals glass, Moh's hardness level≥7 |
|
Transmittance |
≥85% |
|
Bonding Way |
Optical bonding |
|
Bonding Material |
OCA |
|
Thickness |
0.175mm |
|
Modele Size |
(W)421mm×(H)346mm×(T)14.8mm |
|
Net Weight |
2.54KG |
|
Working Temperature |
0℃~+50℃ |
|
Storage Temperature |
-20℃~+60℃ |
|
Working Humidity |
≤85%RH(non-condensing) |
|
Storage Humidity |
≤85%RH(non-condensing) |
LVDS Interface Pin Define:
CN1 socket(Module size):FI-X30HL (JAE)
| Pin NO. | Symbol | Signal |
| 1 | RXO0- | Pixel data |
| 2 | RXO0+ | Pixel data |
| 3 | RXO1- | Pixel data |
| 4 | RXO1+ | Pixel data |
| 5 | RXO2- | Pixel data |
| 6 | RXO2+ | Pixel data |
| 7 | GND | Ground |
| 8 | RXOCLK- | Pixel clock |
| 9 | RXOCLK+ | Pixel clock |
| 10 | RXO3- | Pixel data |
| 11 | RXO3+ | Pixel data |
| 12 | RXE0- | Pixel data |
| 13 | RXE0- | Pixel data |
| 14 | GND | Ground |
| 15 | RXE1- | Pixel data |
| 16 | RXE1+ | Pixel data |
| 17 | GND | Ground |
| 18 | RXE2- | Pixel data |
| 19 | RXE2+ | Pixel data |
| 20 | RXECLK- | Pixel clock |
| 21 | RXECLK+ | Pixel clock |
| 22 | RXE3- | Pixel data |
| 23 | RXE3+ | Pixel data |
| 24 | GND | Ground |
| 25 | NC | Do not connect |
| 26 | NC | Do not connect |
| 27 | NC | Do not connect |
|
28/29/30 |
VDD | Power Supply Input Voltage 5V |
Capacitive touch panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
FAQ:
Contact Person: Irene Mao
Tel: +8613510914282
