|
Product Details:
|
| Size: | 15inch | Resolution: | 1024*768 |
|---|---|---|---|
| Touch Points: | 10points | Touch Screen: | Capacitive Touch Screen |
| Surface Hardness: | More Than 7H | Input Method: | Finger Or Capacitive Pen |
| Working Voltage: | USB(5V) | Bonding Way: | Optical Bonding (OCA) |
| Transmittance: | ≥85% | Brightness: | 300cd/㎡ |
| High Light: | OCA Capacitive Touch Display,300cd/㎡ Capacitive Touch Panel |
||
15Inch Capacitive Touch with TFT of Optical Bonding Module with OCA
| Items | Parameters |
|
LCD Screen Size |
15 inch |
|
Aspect ratio |
4:3 |
|
Resolution |
1024*768 |
|
Visible Area |
(H)304.128mm×(V)228.096mm |
|
Viewing Angle |
80/80/80/80 (Typ.)(CR≥10) |
|
Contrast Ratio |
600:1 |
|
Response Time |
8 (Typ.)(Tr/Td) ms |
|
Colors D |
8Bit 262K/16.7M , 60% NTSC |
|
Scanning Frequency |
60Hz |
|
Interface |
LVDS(See 1.2 for details) |
|
Operation Voltage |
3.3V |
|
Back light Source |
WLED |
|
Center Luminance of White |
300cd/㎡ |
|
Operating Lift of backlight |
Min. 30K hours |
|
Operation Voltage |
12V (for reference) |
|
Operation Current |
Typ current:240ma |
|
BLU Power consumption |
Max. 10.92W(for reference) |
|
Touch Screen Type |
10 point G+G capacitive touch panel |
|
Touch Mode |
Finger or capacitor pen |
|
Response Speed |
10ms |
|
Reported Rate |
100Hz |
|
Resolution |
≥4096×4096 |
|
Touch Times |
Durable single-point≥30 million times |
|
Interface |
USB |
|
Working Voltage |
Typical value+5VDC |
|
Glass Thickness |
Total 2.45mm±0.2(Cover1.1mm+SCA0.25mm+Senser1.1mm) |
|
Surface Treatment |
NO |
|
Surface Durability |
Surface hardness equals glass, Moh's hardness level≥7 |
|
Transmittance |
≥85% |
|
Bonding Way |
Optical bonding |
|
Bonding Material |
OCA |
|
Thickness |
0.175mm |
|
Modele Size |
(W)421mm×(H)346mm×(T)14.8mm |
|
Net Weight |
1.52KG |
|
Working Temperature |
-20℃~+60℃ |
|
Storage Temperature |
-20℃~+60℃ |
|
Working Humidity |
≤85%RH(non-condensing) |
|
Storage Humidity |
≤85%RH(non-condensing) |
LVDS Interface Pin Define:
CN1 socket(Module size):185083-20121 (P-TWO ELECTRIC TECHNOLOGU CO,.LTD)
| Pin NO. | Symbol | Signal | Input data signal:8bit | Input data signal:6bit |
| 1 | VCC | Power supply | Power supply | |
| 2 | VCC | |||
| 3 | GND | Ground | Ground | |
| 4 | REV | Selection of scan direction | High:Reverse scan Low or Open:Normal scan | |
| 5 | D0- | Pixel data | R0-R5,G0 | |
| 6 | D0+ | |||
| 7 | GND | Ground | Ground | |
| 8 | D1- | Pixel data | G1-G5,B0-B1 | |
| 9 | D1+ | |||
| 10 | GND | Ground | Ground | |
| 11 | D2- | Pixel data | B2-B5,DE | |
| 12 | D2+ | |||
| 13 | GND | Ground | Ground | |
| 14 | CLK- | Pixel data | Pixel clock | |
| 15 | CLK+ | |||
| 16 | GND | Ground | Ground | |
| 17 | D3- | Pixel data |
R6-R7 G6-G7 B6-B7 |
Ground |
| 18 | D3+ | |||
| 19 | NC | Non connection | -- | |
| 20 | SEL6/8bit | Selection of the number of colors | LOW | High or Open |
Capacitive touch panel:
Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
FAQ:
Contact Person: Irene Mao
Tel: +8613510914282
