|
Product Details:
|
| Type: | Projected Capacitve Touch Screen | Size: | 75 Inch |
|---|---|---|---|
| Touch Points: | 10points Or More | Interface: | USB |
| Structure: | G+F+F | Surface Hardness: | ≧7H |
| IC Solution: | ILITEK | Panel Color: | Black |
| Transmittance: | ≥85% | Response Time: | 10ms |
| High Light: | GFF PCAP Touch Panel,75" PCAP Touch Panel,DC5V PCAP Touch Panel |
||
Black Multi Touch Points DC5V 75" GFF PCAP Touch Panel
75"GFF PCAP Touch Panel with Multi Touch Points with Utra-narrow Bezel
Basic specification:
| Size | 75 inch |
| Total thickness | 6.5±0.5mm |
| Outline of Cover Lens | 1760*1038 +0/-1mm |
| Outline of ITO film Sensor | 1760.66*1038.93 ±0.5mm |
| Viewing Area | 1650.66*928.53 ±0.5 mm |
| Active Area | 1650.66*928.53±0.5 mm |
| Interface | USB |
| Input voltage | DC5V |
| Response time | 10ms |
| Report rate | 100 HZ |
| Input method | Hand writing or capacitive pen |
| Transmittance | ≥85% |
| Package list | 75 inch Touch panel,controller board and USB cable |
| AG Haze Degree | 6±2 |
SP-ITO introduction
SP- ITO is a thin film material that can conduct electricity and behave as optically transparent. It is an extremely important optoelectronic material. It is widely used in P- cap Touch Panel,Smart Window,EMI etc.
SP-ITO flexible nano transparent conductive material uses magnetron sputtering process, which effectively improves the stability and cost advantage of the product. It is completely different from ITO, metal grid, and nano silver wire, and has a greater cost-effective advantage.
SP-ITO advantages
Compared with other materials, SP-ITO has good electrical conductivity, good light transmission, excellent flexibility, high cost performance, good stability, and no moiré issue.
SP-ITO material parameter
|
SP-ITO-5 (In development) |
Unit | Spec | Test Method |
| Resistance | Ω/□ | 5 | ASTM D 991 |
| Transmittance | % | 84 | ASTM D1003 |
| Haze | % | 0.45 | ASTM D1003 |
| b*(T) | % | 1.6 | ASTM E1164 |
| Uniformity | % | 3.2% | (Max.-min.)/ 2•Ave |
| Adhesion | - | 5B | ASTM D3359 |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Dyne(HC) | - | 40 | Arco pen 5s |
| SP-ITO-10 | Unit | Spec | Test Method |
| Resistance | Ω/□ | 10 | ASTM D 991 |
| Transmittance | % | 86 | ASTM D1003 |
| Haze | % | 0.42 | ASTM D1003 |
| b*(T) | % | 1.4 | ASTM E1164 |
| Uniformity | % | 2.5% | (Max.-min.)/ 2•Ave |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Adhesion | - | 5B | ASTM D3359 |
| Dyne(HC) | - | 40 | Arco pen 5s |
Competitive advantages:
1.21 years experience in designing and manufacturing touch panel, G+G / G+F+F are
available.
2. A strong research team for both software and hardware and provide good pre-sales
and after-sales service.
3. Except some standard products, customized touch panel from 3.5” to 86” now, the
bigger size is been developing and researching.
4. Touch-China has created a complete ecological chain related to intelligent touch
display products, from AG glass material - cover glass - capacitive touch panel- optical
bonding with LCD display.
5. Own industrial parks, good guarantee for product quality and lead time.
6. Touch panels for automobile,industry are in a leading position in China.
Product drawing:
Contact Person: Irene Mao
Tel: +8613510914282
